Series 1500 Ladders

    Partially-Assembled, Standard Angle Ladders

The SERIES 1500 is the “assembly required” version of our 1000 series. Packaged and partially assembled, the ladders require approximately 15-30 minutes to assemble, depending on size. This series has the most selection of all our products, ranging from three to sixteen steps.

450 lb. load rating.

• All tube members are 1″ steel tube construction.
• Steps are 7″ deep in your choice of tread.
• Top steps are 10″, 20″ or 30″ deep.
• Spring-loaded 2″ casters are used on 3 to 4 step ladders. The Cotterman® SafeLock is used on 5 step ladders and above.
• Gray powder coat is the standard finish.
• Series 1500 ladders meet applicable OSHA and ANSI standards.
• CAL-OSHA models also available.

VIEW PRODUCT LITERATURE

First Thing’s First

First, we need to determine what size ladder you need. One of the most common mistakes made in ordering many ladders is getting them too large for the available workspace. Here are some things to consider before ordering your new ladder:

A: Working Height

is the approximate height that you would like to be able to comfortably reach. It is usually calculated at 5.5′ above the ladder’s platform height.

B: Overall Height

is VERY important. You want to be sure that your ladder will not be too tall to fit into your workspace. This includes being able to fit through any doors that you may need to move it through, or under any ceilings or fixtures that you may have.

C: Top Step Height

is the measurement of the top step from the ground. It’s important that this measurement is not too far above or below your desired working height.

D: Base Width

is also very important because as ladders get taller, the base width increases. It is important to be sure that the ladder will not be too wide for your workspace. We offer different tread widths to accommodate most work areas.

E: Base Length

is the measurement of how long the base of the ladder runs. This is dependent upon the height of the ladder. The taller the ladder, the longer the base. Also lower climb angles increase base length.

*Options such as deeper top steps are available, and will increase the base length. Top steps are available in 10″ – 12″(standard), 20″ – 24″, and 30″.

Product Selection Guide

Our NEW Product Selection guide can assist you in choosing the correct ladder for your application. Once you find the ladder that has the correct dimensions for you, just select the red model number, we’ll then ask you to select your tread type, tread width and platform depth. After that we’ll show you the model number(s) that is the best fit for your use.